Deepak Industries

Specialty Mould Release forms a thin, anti-stick and washable crystal clear lubricating layer, between mold and the plastic material, which reduces flow friction and assures full shots of injected plastic in injection molding.  

Silicon Mould Release Agent (SMRA) forms a thin, anti-stick and crystal clear lubricating layer, of high-temperature resistant silicon oil between mould and the plastic material, which reduces flow friction and assures full shots of injected plastic in injection moulding. The atomized particles ejected from MRA can reach interior portions of intricate moulds and enable multiple shots based on the grade of MRA and plastic material used.

Grades available for Polycarbonate, Acrylic, Nylon, PP, HDPE, ABS

Lubricate intricate plastic injection molds of

• Crates,
• Bags,
• Vehicle Plastic Parts,
• Battery Containers,
• TV / Audio Casing Manufacturers,
• Plastic Furniture,
• Rubber Molding etc.
• Blow Molding manufacturers
• PET Bottles

1. Non-staining lubricant for synthetic curtain
2. Treadmill Lubricant
3. Anti Stick agent for Book-binding

 

• Lubricates intricate plastic injection molds
• High-Temperature Resistant
• Reaches interior portions of intricate molds
• Superior Finish with clear contours in final products
• Also works for Bakelite Moldings and Non-Ferrous Die Casting
• Anti-Stick agent
• Water-repellent for natural and synthetic fibers
• No CFC
• Non-toxic
• Crystal Clear
• Non-staining

Additional Information:

• Item Code: 1100
• Production Capacity: 30000
• Delivery Time: 5 Days

Silicon Mould Release Agent (SMRA) forms a thin, anti-stick and crystal clear lubricating layer, of high-temperature resistant silicon oil between mould and the plastic material, which reduces flow friction and assures full shots of injected plastic in injection moulding. The atomized particles ejected from MRA can reach interior portions of intricate moulds and enable multiple shots based on the grade of MRA and plastic material used.

Grades available for Polycarbonate, Acrylic, Nylon, PP, HDPE, ABS

Lubricate intricate plastic injection molds of

• Crates,
• Bags,
• Vehicle Plastic Parts,
• Battery Containers,
• TV / Audio Casing Manufacturers,
• Plastic Furniture,
• Rubber Molding etc.
• Blow Molding manufacturers
• PET Bottles

1. Non-staining lubricant for synthetic curtain
2. Treadmill Lubricant
3. Anti Stick agent for Book-binding

• Lubricates intricate plastic injection molds
• High-Temperature Resistant
• Reaches interior portions of intricate molds
• Superior Finish with clear contours in final products
• Also works for Bakelite Moldings and Non-Ferrous Die Casting
• Anti-Stick agent
• Water-repellent for natural and synthetic fibers
• No CFC
• Non-toxic
• Crystal Clear
• Non-staining

Additional Information:

• Item Code: 1100A
• Production Capacity: 30000/ Day
• Delivery Time: 3-4 Day
• Packaging Details: Transport Packaging of 40 Units

Non Silicon Mould Release Agent (NSMRA) forms a thin, anti-stick and crystal clear lubricating layer, of high-temperature resistant coating between mould and the plastic material, which reduces flow friction and assures full shots of injected plastic in injection moulding. The atomized particles ejected from MRA can reach interior portions of intricate moulds and enable multiple shots based on the grade of MRA and plastic material used.

Grades available for Polycarbonate, Acrylic, Nylon, PP, HDPE, ABS

Lubricate intricate plastic injection moulds of

• Crates,
• Bags,
• Vehicle Plastic Parts,
• Battery Containers,
• TV / Audio Casing Manufacturers,
• Plastic Furniture,
• Rubber Molding etc.
• Blow Moulding manufacturers
• PET Bottles

1. Non-staining lubricant for synthetic curtain
2. Treadmill Lubricant
3. Anti Stick agent for Book-binding

• Lubricates intricate plastic injection moulds
• High-Temperature Resistant
• Reaches interior portions of intricate moulds
• Superior Finish with clear contours in final products
• Also works for Bakelite Mouldings and Non-Ferrous Die Casting
• Anti-Stick agent
• Water-repellent for natural and synthetic fibres
• No CFC
• Non-toxic
• Crystal Clear
• Non-staining

Additional Information:

• Item Code: 1110
• Production Capacity: 30000
• Delivery Time: 6 Days
• Packaging Details: Transport Pack of 40 Units

Safeguard metal surfaces during storage and transport with this temporary anti-corrosion wax coating. Perfect for protecting finely machined parts, such as tools, dies, and moulds, regardless of the environment. This film is thin, dry, and colorless, with the option for blue delivery. It is highly effective and won't require degreasing before use. With its lubricating properties, it offers outstanding corrosion and oxidation protection. Suitable for all climate zones and does not harm rubber or plastic. Grease-free and free of chlorinated solvents for compatibility with all lubricants.
Properties:

• For prevention of corrosion of stored metal parts like MOULDS, DIES, SPARES etc of every type of metal.
• The coating effectively prevents corrosion when the metal items are exposed.
• Over a long period of time to adverse weather conditions like humidity, moisture, salinity, industrial fumes, gases.
• MICRON Mould saver coating is excellent storage protection for all metal parts.
• Coated parts can be directly reused without much preparation.

Advantages:

• Gives outstanding protection against corrosion. Prevents oxidation, rusting by forming a thin film. Forms very fine dry wax film due to aerosol mist spraying.
• Fully compatible with lubricants, plastics, rubbers. Need not be removed before welding.
• Easily removable before painting. 

Additional Information:

• Item Code: 1201
• Production Capacity: 20000
• Delivery Time: 4 days
• Packaging Details: 40 pcs carton box

• 1. General description

  • Precision cleaner for sensitive
  • electrical/electronic equipment.
  • Removes light contaminants, dust,
  • dirt, light oils and finger prints.
  • Leaves no residue. 

  2. Features

  • • No ozone depleting action.
  • • Does not leave a residue.
  • • Non corrosive.
  • • Non conductive.
  • • Safe on all metal surfaces, does not stain.
  • • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
  • • Convenient 360° (including inverted position) spray valve for aerosols.
  • • High purity Butane propellant, giving an active product content of 95%.

  3. Applications

  • • Fast cleaning action for removal of flux traces, light oils, finger prints and other contaminants.
  • • Electro-mechanical assemblies.
  • • Control assemblies.
  • • All electrical contacts.
  • • Electronic components.
  • • Printed circuit boards.
  • • Sensors.

  4. Directions

  • • Spray liberally and allow to run off.
  • • Use extension tube for more precise application.
  • • Use only with adequate ventilation.
  • • Test before use on sensitive materials.
  • • Do not use on energized equipment.
  • • Do not use on sensitive electronic equipment.
  • • Allow to dry completely before reactivation.
  • • Protect and re-lubricate if necessary.

Additional Information:

• Item Code: 3201
• Production Capacity: 10000
• Delivery Time: 5 Days

High-Performance Cleaner for Moulds, Dies, and Tools

Overview:
Micron Aerosols Mould Cleaner is a fast-evaporating, industrial-grade solvent cleaner engineered to deliver exceptional cleaning performance for all types of plastic moulds, metal dies, and industrial tools. Specially formulated to penetrate and dissolve stubborn residues, it removes grease, wax, oil, and light carbon deposits without leaving behind any residue — ensuring precision, speed, and efficiency in tool maintenance.

Designed for use in demanding manufacturing environments, Micron Mould Cleaner offers performance on par with (and in many cases exceeding) top global brands like Ambersil — while being proudly Made in India, optimized for local conditions, and priced more competitively.

Key Features:

✅ Fast Evaporation Rate – Dries rapidly to minimize downtime and preparation time between production cycles.

✅ Residue-Free Finish – Leaves no film, ensuring no surface contamination that could affect mould performance or part quality.

✅ Strong Solvency Power – Effectively removes grease, silicones, waxes, mould-release agents, and light carbon from metal surfaces.

✅ Safe on Metals – Non-corrosive and compatible with most metals used in industrial tooling and mould-making.

✅ Convenient Aerosol Application – Easy-to-use spray format allows for precise, targeted cleaning with minimal waste.

✅ Non-Conductive – Safe for use around electrical components when fully dry.

✅ Ideal for Preventive Maintenance – Helps extend mould life and maintain production quality by keeping moulds clean and free from contaminant buildup.

Typical Applications:

• Injection moulding tool maintenance

• Cleaning compression or extrusion moulds

• Pre-treatment before applying anti-rust or protective sprays

• Toolroom and die shop cleaning tasks

• Automotive plastic part moulding units

• Electronics and medical-grade component moulders

Why Choose Micron Mould Cleaner Over Imported Alternatives?

• 🇮🇳 Made in India for Indian Conditions

• 💸 Better Value per Use — comparable performance at a more economical price

• 🔄 Easy Local Availability with fast logistics and distribution

• 🛠️ Custom Formulation Support — available for high-volume clients

• 🧪 Backed by Micron’s Proven Industrial Chemistry Expertise

Micron Aerosols is trusted by toolrooms, automotive OEMs, plastics manufacturers, and electronics firms across the country for its consistent quality and performance. If you’re looking to upgrade your maintenance without overpaying for imported brands, it’s time to switch to Micron Aerosols Mould Cleaner — cleaner tools, better output.

Additional Information:

• Item Code: 1220
• Production Capacity: 30000
• Delivery Time: 3 Days